Eliminate high labor cost by getting our Dent Repair Removal Kit. It is suitable for all kinds of cars dent removal. It also works for truck, motorcycle, washing machine, refrigerators and so on. It will surely save you time and money.
INSTRUCTIONS: 1. Clean the dent with a clean wet cloth; 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3. Use a proper drawing gasket. Large dent requires a large drawing gasket. 4. Pull the trigger and apply the drawing gasket with extruded glue; 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres; 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backward to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth.
Inclusions: 18x PDR Glue Pulling Tabs 1x 2 in 1 Dent Removal T Bar Tools
choosing a selection results in a full page refresh